S&S Cycle - Quickee Pushrods - Twin Cam/XL
descriptionFeature revolutionary design - allows quicker, easier installation without the removal of the rocker covers
.4375” diameter Chromoly steel
Threaded adjuster screws into the pushrod until the threads disengage and the adjuster simply slides into the pushrod, making installation or removal a snap
Once the pushrod is installed and adjusted, the lock nut prevents the adjuster from moving
The ball ends of the pushrods are drilled so that oil can flow through the pushrod
Made in the U.S.A.
Twin Cam and XL applications will require aftermarket pushrod tubes that allow access to adjusters.
S&S Quickee pushrods are designed especially for use with Evolution and Twin Cam style hydraulic tappets. They are not compatible with stock or aftermarket Shovelhead hydraulic tappets or most solid-style tappets.
.4375” diameter Chromoly steel
Threaded adjuster screws into the pushrod until the threads disengage and the adjuster simply slides into the pushrod, making installation or removal a snap
Once the pushrod is installed and adjusted, the lock nut prevents the adjuster from moving
The ball ends of the pushrods are drilled so that oil can flow through the pushrod
Made in the U.S.A.
Twin Cam and XL applications will require aftermarket pushrod tubes that allow access to adjusters.
S&S Quickee pushrods are designed especially for use with Evolution and Twin Cam style hydraulic tappets. They are not compatible with stock or aftermarket Shovelhead hydraulic tappets or most solid-style tappets.
