Feuling - Cam Plate - Chain Drive - Twin Cam
descriptionFeuling® HIGH FLOW cam plates for T/C® engines increase engine oil flow and volume by enlarging the oil pump reservoirs and critical oil passages, including matching the oil port holes throughout the cam plate to the port holes in the engine case increasing engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings resulting in 25-35 degree cooler engine temperatures
Made from 7075 billet aluminum, which is 50% harder and stronger than the factory, SE® and other aftermarket cam plates; the 7075 increases the strength and hardness of the cam plate, holding tighter tolerances under temperature, eliminating flexing and the need for bronze bushings as 7075 material has excellent bearing-like properties
Feuling® cam plates are blueprinted and matched to the Feuling® oil pumps, which allow the Twin Cam® engine to take full advantage of the increased volume from the high-flow oil pumps, resulting in cooler and quieter engine operation
Tighter cam bearing bore tolerance for improved press fit
Cam plates are pressure-tested; pressure relief valve and spring are pre-set and designed for increased volume and pressure, eliminating the need to stretch the spring or use of a shim
When matched with the Feuling® Race Series Oil Pump, rear wheel power gains of three Horsepower and 4 ft/lbs of Torque are achieved
For use ONLY with the Feuling® oil pumps
Bolts into stock location
Great for those who have already upgraded their early-style engine and like their existing camshafts
Cam plate includes bearing retainer plate and hardware
Require the purchase of "factory" hydraulic chain drive tensioners
For use ONLY with Feuling® oil pumps PART#s 0932-0023 and 0932-0026
Made in the U.S.A.
For use ONLY with Feuling® oil pumps
Made from 7075 billet aluminum, which is 50% harder and stronger than the factory, SE® and other aftermarket cam plates; the 7075 increases the strength and hardness of the cam plate, holding tighter tolerances under temperature, eliminating flexing and the need for bronze bushings as 7075 material has excellent bearing-like properties
Feuling® cam plates are blueprinted and matched to the Feuling® oil pumps, which allow the Twin Cam® engine to take full advantage of the increased volume from the high-flow oil pumps, resulting in cooler and quieter engine operation
Tighter cam bearing bore tolerance for improved press fit
Cam plates are pressure-tested; pressure relief valve and spring are pre-set and designed for increased volume and pressure, eliminating the need to stretch the spring or use of a shim
When matched with the Feuling® Race Series Oil Pump, rear wheel power gains of three Horsepower and 4 ft/lbs of Torque are achieved
For use ONLY with the Feuling® oil pumps
Bolts into stock location
Great for those who have already upgraded their early-style engine and like their existing camshafts
Cam plate includes bearing retainer plate and hardware
Require the purchase of "factory" hydraulic chain drive tensioners
For use ONLY with Feuling® oil pumps PART#s 0932-0023 and 0932-0026
Made in the U.S.A.
For use ONLY with Feuling® oil pumps
